|
LUXMAN ULTIMATE HIGH FIDELITY COMPONENT
INTEGRATED AMPLIFIER L-100
The first Amplifier with Volume Touch Sensor.
New Tone Control Linear Equalizer.
SELECTORS: Input Source; Linear Equalizer;
Tone Control Frequencies; Balance/Attenuate.
SWITHCES: Tone Control & Low Boost/ Tone Control
Filter Frequencies Low (70 Hz/Off/10 Hz); High (7 kHz/Off/12 kHz)
Mode (Left/Right); Mode (Reverse/Stereo/Mono)
Dubbing (1>2/2>1); Monitor (Deck-1//Source/Deck-2)
Speaker Selection (A, B).
POWER SUPPLY: AC 120 V, 60 Hz.
AC OUTLETS: 2 Unswitched/100 W; 2 Switched/100 W.
Specifications: All Acoustic´75 BIC-Luxman-Micro.
Photos: (1-5) audioscope.
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 1/Woodcase |
| Power consumption: | 250 W @ 120/240 V |
| | | Pre Amplifier | | Inputs: | Phono MM I+II; Tuner; AUX I+II; Tape I+II
Deck-2 (RCA) |
| Inp. Sensitivity Phono MM: | -5 dB/ 0 dB /+5 dB mV |
| Inp. Impedance Phono MM: | 30/ 50/ 100 kΩ |
| Inp. Sensitivity Phono 2: | -5 dB/ 0 dB/+5 dB mV |
| Inp. Impedance Phono 2: | 50 kΩ |
| Outputs: | 2 REC OUT; 2 Monitor |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Frequencies: | 150 / 300 / 600 Hz
1.5 /3 / 6 kHz |
| Filters: | Low Cut (70 Hz/ 0/ 10 Hz)
High Cut (7 kHz/ 0/ 12 kHz) |
| | | Power Amplifier | | Continuous power 8Ω: | 100 + 100 Watts |
| Frequency Response: | 20-20,000 HZ |
| Harmonic Distortion: | <0.01 % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 19.1 x 6.9 x 13.8 (w) x (h) x (d) |
| Dimensions in mm: | 485 x 175 x 350 (w) x (h) x (d) |
|
|
|
