|
LUXMAN STUDIO STANDART SERIES 210
Stereo Integrated Amplifier with Duo-Beta Circuit.
FEATURES: Speaker Selection (A, B, A+B). Operation Indicator.
Push Buttons: Tone Defeat, Low Cut, High Cut, Mode (Stereo/Mono), Loudness.
Monitor Source, Tape 1/2, Dubbing 2-1.
Switches: Tone Controls, Source (Tuner, AUX/DAD, Phono, Phono Subsonic), Balance, Volume.
POWER REQUIREMENT: 220 V/50 Hz.
Specifications: Luxman Ultimate HiFi Components 1985/86.
Photos: (1-5) ebay.de 251007115538
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| | | 1. General | | System: | Integrated Transistor Amplifier (Duo Beta) |
| Colour: 1=Silver, 2=Black: | 1, Champagner |
| | | Pre Amplifier | | Inputs: | Phono MM; Tape I+II; AUX/DAD; 2 Monitor |
| Quadro: | no |
| Inp. Sensitivity High Level: | 160 mV |
| Inp. Impedance High Level: | 40 kΩ |
| Frequency Response High Level: | 20-100,000 (+0/-1.5 dB) HZ |
| Signal/Noise High Level: | >117 (500 mV) db |
| Inp. Sensitivity Phono MM: | 1.8 mV |
| Inp. Impedance Phono MM: | 0.05 kΩ |
| Frequency Response Phono MM: | RIAA (±1 dB) |
| Signal/Noise Phono MM: | >90 (5 mV) db |
| Outputs: | 2 REC OUT |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Frequencies: | ±8 dB/100 Hz; ±8 dB/10 kHz |
| Filters: | LOW CUT (70 Hz)
HIGH CUT (7 kHz)
Phono Subsonic |
| | | Power Amplifier | | Speaker Outputs: | 2 x 2 Speakers; Phones |
| Continuous power 8Ω: | 45 + 45 (IHF); 60 + 60 (DIN) Watts |
| Frequency Response: | 10-100,000 HZ |
| Harmonic Distortion: | 0.02 (4 Ώ) % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 17.83 x 12.48 x 4.37 (w) x (h) x (d) |
| Dimensions in mm: | 453 x 317 x 111 (w) x (h) x (d) |
| Weight in lbs: | 14.77 lbs |
| Weight in Kg: | 6.7 Kg |
|
|
|
