|
Semiconductors: 27 Transistors; 8 Diodes, 2 Zener-Diodes; 1 LED.
Additional Features:
Tape-Monitor Switch, Tone Control, Mode Selector Switch,
Volume Control, Speaker Selection Switch, DIN Connector. Tone Control: Lux NF.
Technical Specifications: Luxman Folder.
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 1 (woodcase) |
| Power consumption: | 170 W @ 120/240 V |
| | | Pre Amplifier | | Inputs: | Phono MM; Tuner; Tape; AUX I+II; Monitor |
| Quadro: | no |
| Inp. Sensitivity High Level: | 150 mV |
| Inp. Impedance High Level: | >60 kΩ |
| Signal/Noise High Level: | >83 db |
| Inp. Sensitivity Phono MM: | 2.6 mV |
| Inp. Impedance Phono MM: | 50 kΩ |
| Frequency Response Phono MM: | RIAA ±0.5 dB |
| Signal/Noise Phono MM: | >64 db |
| Outputs: | 2 REC OUT (RCA/DIN) |
| Output Voltage Rec Out: | 260 (RCA); 1.6 (DIN) mV |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Frequencies: | ±10 dB/100Hz; ±10 dB/10 kHz |
| Filters: | SUBSONIC (-6 dB/oct./ 70 Hz); HIGH (-6 dB/oct./ 7 kHz) |
| Loudness: | yes |
| | | Power Amplifier | | Speaker Outputs: | 2 x 2 Speakers; Phones |
| Continuous Power 4Ω: | 60 + 60 (DIN) Watts |
| Continuous power 8Ω: | 38 + 38 (IHF) Watts |
| Frequency Response: | 15~50,000 (-1 dB) HZ |
| Signal to Noise Ratio: | <0.05 db A, short circuited |
| Damping factor: | >90 (8Ω) |
| | | 2. Physical | | Dimensions in Inches: | 17-3/8 x 6-5/16 x 8-7/8 (w) x (h) x (d) |
| Dimensions in mm: | 440 x 160 x 225 (w) x (h) x (d) |
| Weight in lbs: | 15.4 lbs |
| Weight in Kg: | 7 Kg |
|
|
|
