FEATURES: LED Peak-Level Indicator (0, -6, -9, -12, -15, -18 dB), switchable (0 dB, -12 dB); FM Dolby (retrofit); Tape-to-Tape (TAPE Monitor); Raising Delay; Loudness, Muting.
Specifications: Luxman R-1050 Prospect.
Fotos: Thanks to Charles for the picture! (1),
(2-3) ebay.com
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| 1. General | System: | Transistor Receiver (AM/FM) |
Colour: 1=Silver, 2=Black: | 1; 2 |
Power consumption: | 270 W @ 120/240 V |
| Pre Amplifier | Quadro: | no |
Inp. Sensitivity High Level: | 150 mV |
Signal/Noise High Level: | >86 dB db |
Inp. Sensitivity Phono MM: | 2.5 mV |
Signal/Noise Phono MM: | >66 dB db |
Outputs: | PRE OUT; REC OUT |
| Equalizer | Tone Controls: | Bass; Treble |
Frequencies: | Bass: ±10 dB/ 100 Hz; Treble: ±10 dB/ 10 kHz |
Filters: | LOW (70 Hz/6dB/oct.); HIGH (70 kHz/6dB/oct.) |
Loudness: | yes |
| Power Amplifier | Continuous Power 4Ω: | 70 + 70 (IHF); 90 + 90 (DIN) Watts |
Continuous power 8Ω: | 55 + 55 (IHF); 65 + 65 (DIN) Watts |
Frequency Response: | 10-50,000 (-1 dB) HZ |
Damping factor: | > 60 (8 Ω) |
Harmonic Distortion: | <0.05 (8 Ω, 55 W) % at rated output |
| Tuner | Display: | analog |
Station Preset: | 0 |
Signal Strength Meter: | LED : 0=NO, 1=YES |
Center Tuning Meter: | 1 : 0=NO, 1=YES |
Inp. Sensitivity Mono: | 0.9 μV |
Inp. Sensitivity Stereo: | 2.3 μV |
Harmonic Distortion: | 0.2 / 0.2 / 0.4 (Stereo 65 dBf 100Hz/ 1kHz/ 6kHz); 0.1/ 0.1/ 0.3 (Mono 100Hz/ 1kHz/ 6kHz) % at rated output |
Signal/Noise Mono: | 74 (65 dBf) db |
Signal/Noise Stereo: | 70 (65 dBf) db |
Crosstalk: | 52 (AM) db |
IF Rejection: > | 85 (Mono) db |
| 2. Physical | Dimensions in Inches: | 19.3 x 7.1 x 13.9 (w) x (h) x (d) |
Dimensions in mm: | 490 x 180 x 355 (w) x (h) x (d) |
Weight in lbs: | 29.8 lbs |
Weight in Kg: | 13.5 Kg |
|
|
|