|
SANSUI A-80 Integrated Transistor Amplifier. FEATURES: DC Servo Motor. Indicators for Power Level (left/right) and Peak Level (5 segments, LED). Selectors for Input (Tape 1/2, Phono MM/MC; Tuner, AUX) and Speaker System (A, B, A+B, OFF). Balance Controls, Tone Controls (Bass, Treble); High & Subsonic Filters, Loudness, Muting. Phones. Electronic overload protecting device. Specifications: JB 10(´80). Foto: ebay.
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 2 |
| | | Pre Amplifier | | Inputs: | Phono MM+MC; Tuner; Tape I+II; AUX; Monitor |
| Inp. Sensitivity High Level: | 150 mV |
| Inp. Impedance High Level: | 47 kΩ |
| Signal/Noise High Level: | 95 (IHF) db |
| Inp. Sensitivity Phono MM: | 2.5 mV |
| Inp. Impedance Phono MM: | 47 kΩ |
| Frequency Response Phono MM: | RIAA (±0.6 dB) |
| Signal/Noise Phono MM: | 80 (IHF) db |
| Inp. Sensitivity Phono MC: | 0.1 mV |
| Inp. Impedance Phono MC: | 47 kΩ |
| Signal/Noise Phono MC: | 80 (IHF) db |
| Output Voltage Rec Out: | 150 mV |
| Impedance Rec Out: | 47 kΩ |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Filters: | Subsonic; High |
| Loudness: | yes |
| | | Power Amplifier | | Speaker Outputs: | 2 x 2 Speakers; Phones |
| Continuous power 8Ω: | 65 + 65 (20-20,000 Hz); 72 + 72 (RMS, 1 KhZ); 75 + 75 (DIN, 1 kHz) Watts |
| Frequency Response: | 5-70.000 (+0.5/-2 dB) HZ |
| Harmonic Distortion: | 0.05 % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 16.93 x 5.79 x 9.89 (w) x (h) x (d) |
| Dimensions in mm: | 430 x 147 x 251 (w) x (h) x (d) |
| Weight in lbs: | 15.65 lbs |
| Weight in Kg: | 7.1 Kg |
|
|
|
