| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 2 |
| | | Pre Amplifier | | Inputs: | Phono MM I+II; Tuner, Tape I+II; AUX I+II |
| Quadro: | no |
| Inp. Sensitivity High Level: | 130 mV |
| Inp. Impedance High Level: | 50 kΩ |
| Inp. Sensitivity Phono MM: | 2/ 4/ 8 mV |
| Inp. Impedance Phono MM: | 30/ 50/ 100 kΩ |
| Inp. Sensitivity Phono 2: | 2 mV |
| Inp. Impedance Phono 2: | 50 kΩ |
| Frequency Response Phono MM: | RIAA 30-15,000 Hz (±0.3 dB) |
| Signal/Noise Phono MM: | 80 db |
| Outputs: | REC OUT |
| Output Voltage Rec Out: | 30-130 mV |
| | | Equalizer | | Tone Controls: | Bass; Middle; Treble |
| Frequencies: | ±10 dB/ 30 Hz; ±5 dB/ 1.5 kHz; ±10 dB/ 20 kHz |
| Filters: | LOW -3 dB (20, 60 Hz); HIGH -3 dB (7, 12 kHz); NF-Muting (0/-20 dB) |
| Loudness: | HIGH (2, 4, 8 kHz) |
| | | Power Amplifier | | Speaker Outputs: | 1 x 2 Speakers, Phones |
| Continuous Power 4Ω: | 120 + 120 (1kHz) Watts |
| Continuous power 8Ω: | 90 + 90 (1 kHz); 80 + 80 (20-20,000 Hz) Watts |
| Frequency Response: | 10-50,000 (±1 dB) HZ |
| Signal to Noise Ratio: | > 80 (IHF) db A, short circuited |
| Damping factor: | 80 (8Ω) |
| Harmonic Distortion: | 0.08 % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 18.11 x 5.91 x 14.76 (w) x (h) x (d) |
| Dimensions in mm: | 460 x 150 x 375 (w) x (h) x (d) |
| Weight in lbs: | 39.68 lbs |
| Weight in Kg: | 18 Kg |
|
