| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 1 (woodcase TA-1 N) |
| Power consumption: | 280 W @ 120/240 V |
| | | Pre Amplifier | | Inputs: | Phono MM I+II; Tuner; Tape I+II (RCA/DIN); AUX I-III |
| Quadro: | no |
| Inp. Sensitivity High Level: | 130 mV |
| Inp. Impedance High Level: | 100 kΩ |
| Signal/Noise High Level: | 90 (IHF, 130 mV) db |
| Inp. Sensitivity Phono MM: | 1.2 mV |
| Inp. Impedance Phono MM: | 47 kΩ |
| Inp. Sensitivity Phono 2: | 1.2 mV |
| Inp. Impedance Phono 2: | 47 kΩ |
| Frequency Response Phono MM: | RIAA |
| Signal/Noise Phono MM: | 70 (IHF, 1.2 mV) db |
| Outputs: | PRE OUT; REC OUT (RCA); REC OUT (DIN) |
| Frequency Response: | 10-200,000 (+0/-2 dB) HZ |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Frequencies: | ±10 dB/100 Hz; ±10 dB/10 kHz |
| Filters: | LOW (6 dB/oct./<100 Hz); HIGH (6 dB/oct./>7 kHz) |
| Loudness: | -8 dB (-30 dB/50 hz); + 3 dB (-30 dB/10 kHz) |
| | | Power Amplifier | | Speaker Outputs: | 2 x 2 Speakers; Phones |
| Continuous power 8Ω: | 50 + 50 (20-20,000 Hz); 65 + 65 (1,000 Hz) Watts |
| Dynamic Power 8Ω: | 120 + 120 Watts |
| Frequency Response: | 7-30,000 HZ |
| Signal to Noise Ratio: | 0.008 db A, short circuited |
| Damping factor: | 100 (1 kHz/ 8 Ohm) |
| Harmonic Distortion: | 0.1 % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 15.75 x 5.87 x 12.87 (w) x (h) x (d) |
| Dimensions in mm: | 400 x 149 x 327 (w) x (h) x (d) |
| Weight in lbs: | 28.66 lbs |
| Weight in Kg: | 13 Kg |
|
