| | | 1. General | | System: | Integrated Transistor Amplifier |
| Colour: 1=Silver, 2=Black: | 1 (woodcase TA-1 N) |
| Power consumption: | 250 W @ 120/240 V |
| | | Pre Amplifier | | Inputs: | Phono MM I+II; Tuner; Tape I+II (RCA); Tape III (DIN) |
| Quadro: | no |
| Inp. Sensitivity High Level: | 140 mV |
| Inp. Impedance High Level: | 50 kΩ |
| Signal/Noise High Level: | 90 (IHF, 140 mV) db |
| Inp. Sensitivity Phono MM: | 2 mV |
| Inp. Impedance Phono MM: | 47 kΩ |
| Inp. Sensitivity Phono 2: | 2 mV |
| Inp. Impedance Phono 2: | 47 kΩ |
| Frequency Response Phono MM: | RIAA |
| Signal/Noise Phono MM: | 70 (IHF, 2 mV) db |
| Outputs: | PRE OUT; CC OUT; REC OUT I+II (RCA); REC OUT III (DIN) |
| Frequency Response: | 15-80,000 (±2 dB) HZ |
| Output Voltage Rec Out: | 140 (RCA); 24 (DIN) mV |
| Impedance Pre Out: | 2.7 (PRE); 0.68 (CC) kΩ |
| Output Voltage Pre Out: | 800 (PRE/CC) mV |
| Impedance Rec Out: | 10 (RCA); 82 (DIN) kΩ |
| | | Equalizer | | Tone Controls: | Bass; Treble |
| Frequencies: | ±10 dB (250-50 Hz / 500-100 Hz); ±10 dB (2.5-10 kHz / 5-20 kHz) |
| Filters: | LOW (6 dB/oct./<100 Hz); HIGH (6 dB/oct./>5 kHz) |
| Loudness: | +10 dB (-30 dB/50 hz); +3 dB (-30 dB/10 kHz) |
| | | Power Amplifier | | Speaker Outputs: | 2 x 2 Speakers; Phones |
| Continuous power 8Ω: | 30 +30 (20-20,000 Hz); 35 +35 (1000 Hz) Watts |
| Dynamic Power 8Ω: | 50 + 50 Watts |
| Frequency Response: | 8-35,000 HZ |
| Signal to Noise Ratio: | 0.05 db A, short circuited |
| Damping factor: | 100 |
| Harmonic Distortion: | 0.1 % at rated output |
| | | 2. Physical | | Dimensions in Inches: | 15.75 x 5.87 x 12.44 (w) x (h) x (d) |
| Dimensions in mm: | 400 x 149 x 316 (w) x (h) x (d) |
| Weight in lbs: | 18.3 lbs |
| Weight in Kg: | 8.3 Kg |
|
