| 1. General | System: | Integrated Transistor Amplifier |
Colour: 1=Silver, 2=Black: | Technics Brown |
Power consumption: | 380 W @ 120/240 V |
| Pre Amplifier | Inputs: | Phono MM I+II; Tuner; Tape I+II; AUX i+II |
Quadro: | no |
Inp. Sensitivity High Level: | 100 mV |
Inp. Impedance High Level: | 50 kΩ |
Frequency Response High Level: | 5-100,000 (-3 dB) HZ |
Signal/Noise High Level: | 90 db |
Inp. Sensitivity Phono MM: | 2 mV |
Inp. Impedance Phono MM: | 25, 50, 100 kΩ |
Inp. Sensitivity Phono 2: | 2 mV |
Inp. Impedance Phono 2: | 25, 50, 100 kΩ |
Frequency Response Phono MM: | RIAA (±5 dB) |
Signal/Noise Phono MM: | 70 db |
Outputs: | 2 REC OUT; 2 PB; REC/PLAY |
Frequency Response: | 5-200,000 (-3 dB) HZ |
Output Voltage Rec Out: | 100 (30 REC/PLAY) mV |
Impedance Pre Out: | 0.1 kΩ |
Output Voltage Pre Out: | 1,000-11,000 mV |
Impedance Rec Out: | 50 kΩ |
| Equalizer | Tone Controls: | Bass; Treble |
Frequencies: | ±12 dB/50 Hz; ±12 dB/20 kHz |
Filters: | LOW (12dB/oct./30 Hz)
HIGH (12dB/oct./9kHz) |
Loudness: | +8 dB /100 Hz (-30 dB) |
| Power Amplifier | Speaker Outputs: | 2 x 2 Speakers; Phones |
Continuous Power 4Ω: | 47 + 47 Watts |
Continuous power 8Ω: | 41 + 41 Watts |
Dynamic Power 4Ω: | 95 + 95 Watts |
Dynamic Power 8Ω: | 62.5 + 62.5 Watts |
Frequency Response: | 5-100,000 (-3 dB) HZ |
Input Sensitivity: | 1,000 mV |
Input Impedance: | 50 kΩ |
Signal to Noise Ratio: | 110 db A, short circuited |
Damping factor: | 50 (4Ω)
100 (8Ω) |
Harmonic Distortion: | 0.08 % at rated output |
| 2. Physical | Dimensions in Inches: | 16-1/8" x 5-1/2" x 13-3/8" (w) x (h) x (d) |
Dimensions in mm: | 410 x 140 x 340 (w) x (h) x (d) |
Weight in lbs: | 22.5 lbs |
Weight in Kg: | 10.2 Kg |
|