Legendary Class A Stereo DC Control Amplifier. FRONT PANEL CONTROLS
LEFT: Meters with Decibel Scale (-50 to +10dB) and Voltage Scale (0.003-1 V).
Power Switch, Phones (voice-coil impedance 4-600 Ω, phones only -∞). Meter Mote for Average (attack time 0.33 sec), Peak (attack time 0.00005 sec) and Peakhold (max. detected value held as meter reading for 2 h). Filter Switches (Low, High, EQ Subsonic).
MIDDLE: Pilot Lamps (OSC, Mic). Input Selectors single touch pushbuttons with pilot lamp and memory function of program source for Aux, Tuner, Phono, Tape 1, 2 or 3 Rec/PB). Rec Selector pushbuttons with pilot lamps for Tape Dubbing (1>2-3, 2>1-3, 3>1-2), Aux, Tuner (with special memory function), Phono, Off.
Tone Position (Rec Out, Pre Out, Off). Mode Selector (rev, stereo, L+R, L, R). Balance Control. Operation Switch(DC, low cut 2 Hz).
RIGHT: Phono and Cartridge Selectors (Phono 1 MC/MM, Phono 2 MC/MM). Master Volume Control (variable loudness), Loudness (On/Off), Muting (-∞, Off, -20dB).
BEHIND FRONT FLAP
LEFT: Phones Level Switch. Pre Out Terminals. Meter Section with Attenuator (-10 dB to -20 dB) and Input Selector (ext, mic, pre out, rec out). OSC Section with Frequency Control (20-20,000 Hz) and Mode Selector (square wave, sine wave, off, warble tone, pink noise). Microphone Section with Jacks (left, rigth), Mixing Level Control and Impedance Selector (600 Ω, 500 kΩ, Mixing, Off).
MIDDLE: Universal Tone Equalizer Section with Tone Mode Selectors, 4 Band Level Controls (-10 dB∼-10 dB) and Selectors for Bandwidth (0.7-7) and Frequency (15-240 Hz; 63-1,000 Hz; 250-4,000 Hz; 1-16 kHz).
RIGHT: Phono (1, 2) Selectors Section with Level Controls (2.5-10 mV) and Selectors for Input Capacitance (100pF∼500pF) and Input Resistance (MM 22∼100 kΩ; MC 10∼220 Ω). Tape 3 terminal (Front/back, PB, Rec Out).
Specifications: Operating Instructions
Wenn Sie dieses Gerät besitzen und Ihre Bilder auf dieser Seite veröffentlichen möchten, wenden Sie sich bitte an den webmaster
Specifications:
| 1. General | System: | Transistor DC Control Amplifier |
Farbe: 1=Silber, 2=Schwarz: | 2 |
Leistungsaufnahme: | 300 W @ 120/240 V |
| Pre Amplifier | Eingänge: | Phono MM I+II; Phono MC; Tuner; Tape; AUX; Mic, 2 Meter Ext. Input |
Quadro: | no |
Eing. Empfindlichkeit Hochpegel: | 150 mV |
Eing. Impedanz Hochpegel: | 47 kΩ |
Frequenzgang Hochpegel: | DC~20,000 (+0/-0.2 dB) HZ |
Eing. Empfindlichkeit Phono MM: | 2.5 mV |
Eing. Impedanz Phono MM: | 22/ 33/ 47/ 75/ 100 kΩ |
Eing. Empfindlichkeit Phono 2: | 2.5 mV |
Eing. Impedanz Phono 2: | 22/ 33/ 47/ 75/ 100 kΩ |
Frequenzgang Phono MM: | DC~20,000 RIAA (±0.2 dB) |
Rauschabstand Phono MM: | 95 (2.5 mV, IHF A); 107 (10 mV, IHF A) db |
Eing. Empfindlichkeit Phono MC: | 0.1 mV |
Eing. Impedanz Phono MC: | 0.00/ 0.022/ 0.047/ 0.10/ 0.22 kΩ |
Rauschabstand Phono MC: | 80 (-160 dBV) db |
Ausgänge: | 2 PRE OUT; 3 REC OUT; 3 PLAYBACK; AC OUTLETS (3 switched, 3 unswitched) |
Frequenzgang: | Phono MC 30 Hz~20 kH RIAA (±0.2 dB) HZ |
Klirrgrad: | 0.003 (0.005 Phono MC, Mic) % bei Nennleistung |
Ausgangssp. Rec Out: | 150 mV |
Impedanz Pre Out: | 0.5 kΩ |
Ausgangssp. Vorverst. Out: | 1,000 mV |
Impedanz Aufnahme Out: | 0.5 kΩ |
| Equalizer | Filter: | Equalizer Subsonic 30 Hz (12 dB/oct.); Low 15 Hz, 30 Hz (18 dB/oct.);
High 8 kHz, 12 kHz (18 db/oct.) |
Loudness: | -20 dB, off, -∞ |
| 2. Physical | Größe in Zoll: | 17.72 x 8.07 x 22.59 (B) x (H) x (T) |
Größe in mm: | 450 x 205 x 574 (B) x (H) x (T) |
Gewicht in Pfund: | 84.88 lbs |
Gewicht in Kg: | 38.5 Kg |
|
|
|