| 1. General | System: | Integrated Transistor Amplifier |
Colour: 1=Silver, 2=Black: | 1 (Rosewood) |
Power consumption: | 25 (480) W @ 120/240 V |
| Pre Amplifier | Inputs: | Phono MM+MC; Tuner; Tape I+II; AUX I+II |
Quadro: | no |
Inp. Sensitivity High Level: | 320 mV |
Inp. Impedance High Level: | 50 (AUX I, Tape I); 100 (Tuner, Tape II, AUX II) kΩ |
Signal/Noise High Level: | 85 db |
Inp. Sensitivity Phono MM: | 3.2 mV |
Inp. Impedance Phono MM: | 47 kΩ |
Frequency Response Phono MM: | RIAA ±0.3 dB (30-15,000 Hz) |
Signal/Noise Phono MM: | 70 db |
Inp. Sensitivity Phono MC: | 0.32 mV |
Inp. Impedance Phono MC: | 0.15 kΩ |
Outputs: | 2 REC OUT (RCA, DIN) |
Output Voltage Rec Out: | 320 (RCA); 10 (DIN) mV |
Impedance Rec Out: | 47 (RCA, DIN) kΩ |
| Equalizer | Tone Controls: | Bass; Treble |
Frequencies: | ±10 dB (50/100 Hz); ±10 dB (10/20 kHz) |
Filters: | LOW (40 Hz/18dB/Okt); HIGH (9kHz/18dB/Okt) |
Loudness: | yes |
| Power Amplifier | Speaker Outputs: | 2 x 2 Speakers (A, B, A+B); Phones |
Continuous Power 4Ω: | 110 + 110 Watts |
Continuous power 8Ω: | 90 + 90 Watts |
Dynamic Power 4Ω: | 180 + 180 Watts |
Dynamic Power 8Ω: | 130 + 130 Watts |
Frequency Response: | 8-150,000 (+0/-1 dB) HZ |
Signal to Noise Ratio: | > 100 (DIN) db A, short circuited |
Damping factor: | > 100 (40-12,500 Hz/ 8 Ώ) |
Harmonic Distortion: | > 0.05 % at rated output |
| 2. Physical | Dimensions in Inches: | 16.3 x 5.5 x 13.8 (w) x (h) x (d) |
Dimensions in mm: | 430 x 140 x 350 (w) x (h) x (d) |
Weight in lbs: | 31.9 lbs |
Weight in Kg: | 14.5 Kg |
|