Categories |
|
|
Click below to visit the classic gallery sites! |
|
|
|
SANSUI Professional Series Pre Amplifier SANSUI CA-2000
FEATURES: Level Volume (4-gang detent); Tone & Filter Switch; Tone Push (Bass/Treble); 3 Tone Controles (Bass/Middle/Treble); Output Selector; LED Assy´s Protector Indicator; Filter & Muting (0 dB, -20 dB); Tape-to-Tape; Tape Play Switch; Lever Guides (1/2 Contacts). Power Voltage: 100, 120, 220, 240 V, 50/60 Hz; 120 V (usable 110-130 V), 60 Hz (USA/CA).
Specifications: Service Manual. Fotos: RetroAudio (1-3); Sansui Vintage (4).
If you own this product and would like to post your pictures on this site, please contact the webmaster
Specifications:
| 1. General | System: | Transistor Pre Amplfier |
Colour: 1=Silver, 2=Black: | 2 /Sansui Grey |
Power consumption: | 26 W @ 120/240 V |
| Pre Amplifier | Inputs: | Phono MM I+II; Tuner; Tape I+II; AUX I+II |
Quadro: | no |
Inp. Sensitivity High Level: | 150 mV |
Inp. Impedance High Level: | 50 kΩ |
Frequency Response High Level: | 10-80,000 (+0.5/-1.0 dB) HZ |
Signal/Noise High Level: | >90 (IHF) db |
Inp. Sensitivity Phono MM: | 2 / 4 / 8 mV |
Inp. Impedance Phono MM: | 30 / 50 / 100 kΩ |
Inp. Sensitivity Phono 2: | 2 mV |
Inp. Impedance Phono 2: | 50 kΩ |
Frequency Response Phono MM: | RIAA (±0.2 dB) |
Signal/Noise Phono MM: | >75 (IHF) db |
Outputs: | REC OUT; Rec Play; 2 x 2 Speakers; Phones |
Harmonic Distortion: | 0.03 (AUX) % at rated output |
Output Voltage Rec Out: | 150 (REC I+II, Pin Jackets); 30 (Tape II REC/PB, DIN Socket) mV |
Output Voltage Pre Out: | 1.,000; 12,000 (max/ 1 kHz) mV |
| Equalizer | Tone Controls: | Bass; Middle; Treble |
Frequencies: | ±10 dB/30 Hz; ±5 dB/1.5 kHz; ±10 dB/20kH.
TONE SELECTOR (turnover freq): 150, 300, 600 Hz (bass); 2, 4, 8 kHz (treble) |
Filters: | LOW -3 dB (12 dB/oct/20 Hz); -3 dB (12dB/oct/60 Hz);
HIGH -3 dB (6 dB/oct/7 kHz); -3 dB (12 dB/oct/12 kHz). |
| 2. Physical | Dimensions in Inches: | 18.1 x 6.3 x 12.2 (w) x (h) x (d) |
Dimensions in mm: | 460 x 160 x 310 (w) x (h) x (d) |
Weight in lbs: | 21.8 lbs |
Weight in Kg: | 9.9 Kg |
|
|
|
|
|
|
Reviews |
|
stefan egger - 07/07/2016 what an elegant ,flexible,great sounding pre amp...LOOKS GOOD ...SOUNDS GOOD,what else could you want.
PRICE...well you can pick up these sweeties at a REASONABLE cost...BECAUSE...audiophiles these days do not want tone controls or anything extraneous to their thinking of minimalism is best.
power...on...off...volume,balance and input selector...that is the SUPPOSED road to audio nirvana.
the Sansui ca2000 is a very well built pre with Quality components that just quietly says...PICK ME...I WILL DELIVER.
DELIVER...IT DOES...AND IT DOES SO WITH LITTLE EFFORT...because it is built with care and a mindset,that is only found in very high end components of today.
there are three tone controls that can be utilized with turn overs making this useful in recording,something minimalists avoid...but if you record at all,these things are necessary.
MM,MC PHONO is really sweet...wide band frequency range and very low distortion make for a sound that is hard to ignore.
this pre amp is a VERY,VERY NICE SOUNDING component,tone controls can be switched out and the soundstage is very precise.
high quality construction means longevity and high quality pots regularily cleaned give the owner years of very fine sound...
you cannot lose.
i have had my TU 9900,CA2000,BA2000 hooked up to LEAK SANDWICH 500 speakers since new and today july 2016,my system still delivers...and delivers with FINESS...
NEVER HAD A BAD DAY IN ALL THOSE YEARS...AND THAT IS NO...BS |
Click to view All Reviews |
|
|
|
|